LeeSti Angle
Email
Download
View
LeeSti Angle is a lighting system in aluminum extrusion with proprietary LED boards. Diffuser with film for not seeing LED. Programmable drivers allow the use of special outputs with the same hardware and kit (programmable at factory). Trim and Trimless versions. Three possible angles (15,30 and 45 degree) specified by designer and fixed so no changes at job site.
LeeSti Angle
LeeSti / Recessed
archlit reserves the right to make changes without prior notice. (05.25.2023)
LeeSti Angle is a lighting system in aluminum extrusion with proprietary LED boards. Diffuser with film for not seeing LED. Programmable drivers allow the use of special outputs with the same hardware and kit (programmable at factory). Trim and Trimless versions. Three possible angles (15,30 and 45 degree) specified by designer and fixed so no changes at job site.
LeAn
LeeSti
Angle
Lumen Output
3017 - 3000 K 1200 lumens / ft 12 w /ft
3014 - 3000 K 1000 lumens / ft 10 w /ft
3011 - 3000 K 780 lumens / ft 7.5 w /ft
3008 - 3000 K 560 lumens / ft 5.5w /ft
3005 - 3000 K 350 lumens / ft 3.1 w /ft
3517 - 3500 K 1200 lumens / ft 12 w /ft
3514 - 3500 K 1000 lumens / ft 10 w /ft
3511 - 3500 K 780 lumens / ft 7.5 w /ft
3508 - 3500 K 560 lumens / ft 5.5w /ft
3505 - 3500 K 350 lumens / ft 3.1 w /ft
WhTu - White tuning 2700K @ 1050 lumens/foot and 6500k @1200 lumens/foot 12.5 watt/foot
All Uplight versions with light will have a transparent diffuser. Please advice if not seen from above
Use of programmable drivers allow different outputs (lumen output
and load)
Finish
WH - White
BK - Black
CU - Custom Color
Specify RAL color
Dimming
O - Non dimmable 120v
1 - Non dimmable 277v
4 - Dimmable 0-10v (4wires, 120 or 277 v)
Flange
Ts - Trimless
Tm - Trim
Aiming Angle
15d - Angle 15 degree from Vertical
30d - Angle 30 degree from Vertical
45d - Angle 45 degree from Vertical
Specify angle so it can be determined at factory.
Angle can be modified at site, with minimal tools
Runs
A - 1' nominal 11 5/8"
B - 2' nominal 23 5/8
C - 3' nominal 34 1/8
D - 4' nominal 46 1/8"
E - 5' nominal 56 5/8"
F - 6' nominal 68 5/8"
G - 7' nominal 79 1/8"
H - 8' nominal 91 1/8"
Total Run: (0 ft 0 in)
Extrusions max length is 8' nominal
Product can be adjust from nominal sizes in multiples of 1.5".
Factory will produce submittals
archlit recommends 4' max length for transport
In runs add 1/8" between modules. archlit generates submittals. Lengths from spec sheet for design purposes
Light Shielding
Dd - Frosted diffuser
Use if reflected surface is gloss so dots of boards are not seen
Nof - No film
No film to use indirect if surface is not gloss so dots can't be seen as
a reflection
Emergency
00 - No Emergency
EM - Emergency
Specify qty only if Emergency
Specify quantity of 4' nominal runs in runs
Notes:
Drivers remote
Max distance to drivers 60'
MacAdam 3, more than 90 CRI LED
Max distance to drivers 60'
MacAdam 3, more than 90 CRI LED
